Welcome to Shandong Jiyang Machinery Factory(Skyscraper Machinery)!
Let me talk about the common faults of hydraulic lifting platforms
Publish Time:
Jun 06,2022
Let me talk about the common faults of hydraulic lifting platforms. If the hydraulic cylinder of the hydraulic lift is severely damaged, uneven internal ring damage or obstacles on top can easily cause uneven cylinder tension and uneven lifting height. It is recommended to carefully check whether the cylinder is normal.
Let's talk about common malfunctions of hydraulic lifting platforms
Hydraulic lifting platforms are now commonplace, but they also present some safety hazards. Therefore, hydraulic lifting platforms were invented to make high-altitude work easier for people. However, people must also be careful when using hydraulic lifting platforms, otherwise malfunctions can easily occur, potentially leading to serious consequences. So, what are the common malfunctions of hydraulic lifting platforms?
1. Severe damage to the hydraulic lifting platform's oil cylinder. If the inner closed loop is damaged unevenly or there are obstacles on top, it can easily cause uneven tension in the oil cylinder and uneven lifting height. It is recommended to carefully check if the oil cylinder is functioning normally.
2. Foreign objects in the hydraulic lifting platform's oil supply pipe can cause uneven pressure in the hydraulic oil supply, resulting in an uneven surface. It is recommended to carefully check if the oil supply pipe is unobstructed.
3. Inconsistent production dimensions of the hydraulic lifting platform's support rods are a quality defect of the lifting platform equipment itself. It is recommended to contact the manufacturer for replacement. The probability of this happening is very low.
4. Inconsistent centerlines of the hydraulic lifting platform's support rods cause the lifting platform to malfunction, resulting in serious platform damage and table tilting. Please carefully check. Hydraulic lifting platforms generally do not undergo rigorous testing before leaving the factory, leading to many accidents in the market. For tilt detection, most small businesses do not pay much attention to the testing process. Therefore, this problem with lifting equipment has many causes. Problems with the oil cylinder and power unit system of the hydraulic lifting platform are often caused by insufficient power and substandard oil cylinder quality. This is also a very important issue for the company itself.
Reasons affecting the table sliding of the lifting platform
The lifting platform has lifting, rotating, and tilting functions and incorporates self-locking, interlocking, travel switches, mechanical limiters, and hydraulic explosion-proof protection measures. This lifting platform has the following characteristics: compact and stable platform structure, capable of withstanding high-frequency continuous operation; stable lifting height to meet the stable lifting requirements of various load platforms; external safety net; overload safety protection hydraulic system to ensure operational safety; rollers, ball bearings, and turntables to meet the requirements of different working conditions.
Lifting platforms are widely used in auditoriums, cinemas, multi-functional halls, studios, and other equipment such as lifting platforms and cultural and sports venues. They can also be spliced on-site, multi-layer ladders, and lifting platforms as needed, allowing for different stages and functional stage effects.
During use, the combined effects of various factors may lead to platform degradation. What are the reasons for this?
The lifting platform's check valve is not tight. Check if the check valve of the hydraulic system is functioning normally. If the check valve is not replaced, the platform will be overloaded, causing the worktable to fall. This is a problem that is easily overlooked.
The hydraulic cylinder of the lifting platform is leaking. Due to poor cylinder sealing performance, the hydraulic cylinder leaks oil, usually a problem with seals and other accessories, or improper pipe closure. When leakage occurs, the pressure drop on the platform and platform surface decreases. It is recommended to carefully check for pipe damage.
Thank you for watching. See you next time.
BLOGS
Liu Tiesheng was re-elected as a member of the Jiyang County CPPCC for five consecutive terms and served two terms as a standing committee member. He is the former chairman of Shandong Jiyang Machinery Factory Co., Ltd. During the transition from a planned economy to a market economy, he demonstrated exceptional foresight and courage, leading the way in technological innovation and contributing to the prosperity of Shandong Province and the nation. His achievements made the company a shining success. He is considered a prominent figure in Jiyang County's 30 years of reform and opening up, a pioneer in the development of the Jiyang lifting platform industry, and a well-deserved leader in the machinery industry!
Introduction to the civil engineering advantages of rail-guided lifting platforms
Guide rail lifting platform is a kind of non-scissor hydraulic lifting mechanical equipment, used for cargo transmission between floors of two or three-story industrial plants, restaurants, and hotels. It can have a low height of 150-300mm, especially suitable for workplaces where pits cannot be excavated, and does not require upper suspension points. It comes in various forms (single-column, double-column, four-column). The equipment operates smoothly. The guide rails of the guide rail lifting platform are generally made of channel steel, I-beams, and square tubes welded together. It is simple, reliable, and economical for cargo transmission. Hydraulic lifting platforms are multifunctional lifting and handling mechanical equipment with lifting heights ranging from 1m to 30m. They can also be customized according to different user needs.
What is the purpose of a guide rail lift platform?
Rail-guided lifting platforms are widely used and are a popular product on the market due to their various advantages. However, there are many points of knowledge that need to be understood when using them, as many users are not aware of them. Next, let me introduce the uses of rail-guided lifting platforms. Those interested can read on.
How to maintain a guide rail lift platform?
The advantages of rail-type lifting platforms lie in the hydraulic system's anti-falling and overload safety protection devices. The railings on each floor and the lifting platform are made of stainless steel. In addition, they feature high load-bearing capacity, high stability, and a long service life. Below are some maintenance methods for rail-type lifting platforms.
What are the advantages of a guide rail lift platform?
The industry of guide rail lifting platforms has a bright future. They offer numerous benefits to businesses, making them highly popular among customers. To help people become more familiar with them, let's discuss the advantages of guide rail lifting platforms. Hopefully, this will be helpful to many.
Dry goods sharing: Understand the functions of a guide rail lift platform in one minute
A rail-guided lifting platform is a hydraulic lifting platform consisting of a hydraulic lifting section, guide rails, and a loading platform. What is the purpose of a rail-guided lifting platform?
Shandong Jiyang Machinery Factory
Tel: 86-531-84211935 86-531-84222430
Fax: 86-531-84211081
Mobile: 86-185-6002-7566
Email: sdjyjxc@126.com
Address: No. 1, Mechanical Industry Park, Jiyang District, Jinan City, Shandong Province (West side of G220 line, Huihe Street)
Mobile Website