Welcome to Shandong Jiyang Machinery Factory(Skyscraper Machinery)!
Below is an explanation of the points to note when maintaining a hydraulic lift platform.
Publish Time:
Jun 02,2022
Below are some precautions for maintaining hydraulic lift platforms. A hydraulic lift platform is a lifting machinery and equipment consisting of a walking mechanism, a hydraulic mechanism, an electrical control mechanism, and a support mechanism.
The following explains hydraulic maintenance Lifting platform Matters needing attention
A hydraulic lifting platform is a lifting and hoisting machinery equipment consisting of a walking mechanism, a hydraulic mechanism, an electric control mechanism, and a support mechanism.
Hydraulic oil is formed into a certain pressure by the vane pump, and enters the lower end of the hydraulic cylinder through the oil filter, explosion-proof electromagnetic reversing valve, throttle valve, hydraulic check valve and balance valve, causing the hydraulic cylinder piston to move upward, lifting the heavy object. The oil returning from the upper end of the hydraulic cylinder returns to the oil tank through the explosion-proof electromagnetic reversing valve. Its rated pressure is adjusted by the overflow valve, and the pressure reading is observed by the pressure gauge.
Let's talk about hydraulics Lifting platform Matters to note during maintenance
1. When the hydraulic lifting platform power indicator light is on, press the up button, the motor rotates, and the lifting platform does not rise.
2. When the elevator is working, there will be abnormal noises. It needs to be shut down immediately to avoid serious damage to the lifting platform.
3. During operation, the aluminum alloy hydraulic Lifting platform The support legs should be supported, and the support leg bolts should be adjusted to ensure that the support legs are evenly stressed. Do not move or shake the lifter during the lifting process and when the lifter is in the raised state.
4. Perform a performance check before use to ensure that the elevator is in good working condition: the effectiveness of the control buttons, power cords and sockets is undamaged, the oil pipelines are undamaged, the stability of the protective device guide rails, the fixing of the various contact point bolts, and the appearance quality is intact.
5. After completing the work of the hydraulic lifting platform, all parts need to be wiped and cleaned. When not in use, the worktable should be lowered to the lowest position to prevent corrosion of the piston rod surface.
6. Hydraulic Lifting platform It should be operated strictly according to the specified load capacity. Overloading will damage life and goods. Working on an elevator without a safety fence may cause personnel to fall, resulting in casualties.
How to maintain an electric lifting platform?
As we all know, electro-hydraulic lifting platforms are widely used in many fields, bringing great convenience to people's lives and meeting the needs of modern technological products, especially the relatively high level of intelligence, which can improve people's work efficiency and reduce the burden and pressure of labor, so in this case, electric hydraulic lifting platforms are widely used.
So how to maintain it during use?
Electric Lifting platform Generally used outdoors, in this case, it will be exposed to wind and sun. If you want to maintain this type of equipment, you can do anti-rust spray painting once a year, which can keep the appearance intact for a long time.
Checking the condition of the hydraulic oil every six months is also important, but it is important to pay attention to the oil. If the oil is not high, hydraulic oil needs to be added regularly when the hydraulic oil is insufficient, especially the platform shaft wheels and rotating parts need regular lubrication to reduce friction and make the equipment run better, but when the bearings, rollers and other parts are worn, the relevant problems should be dealt with in time.
Okay, thank you for watching, see you next time.
Let me tell you about Lifting platform The reasons affecting the vertical speed and the reasons for not rising
BLOGS
Liu Tiesheng was re-elected as a member of the Jiyang County CPPCC for five consecutive terms and served two terms as a standing committee member. He is the former chairman of Shandong Jiyang Machinery Factory Co., Ltd. During the transition from a planned economy to a market economy, he demonstrated exceptional foresight and courage, leading the way in technological innovation and contributing to the prosperity of Shandong Province and the nation. His achievements made the company a shining success. He is considered a prominent figure in Jiyang County's 30 years of reform and opening up, a pioneer in the development of the Jiyang lifting platform industry, and a well-deserved leader in the machinery industry!
Introduction to the civil engineering advantages of rail-guided lifting platforms
Guide rail lifting platform is a kind of non-scissor hydraulic lifting mechanical equipment, used for cargo transmission between floors of two or three-story industrial plants, restaurants, and hotels. It can have a low height of 150-300mm, especially suitable for workplaces where pits cannot be excavated, and does not require upper suspension points. It comes in various forms (single-column, double-column, four-column). The equipment operates smoothly. The guide rails of the guide rail lifting platform are generally made of channel steel, I-beams, and square tubes welded together. It is simple, reliable, and economical for cargo transmission. Hydraulic lifting platforms are multifunctional lifting and handling mechanical equipment with lifting heights ranging from 1m to 30m. They can also be customized according to different user needs.
What is the purpose of a guide rail lift platform?
Rail-guided lifting platforms are widely used and are a popular product on the market due to their various advantages. However, there are many points of knowledge that need to be understood when using them, as many users are not aware of them. Next, let me introduce the uses of rail-guided lifting platforms. Those interested can read on.
How to maintain a guide rail lift platform?
The advantages of rail-type lifting platforms lie in the hydraulic system's anti-falling and overload safety protection devices. The railings on each floor and the lifting platform are made of stainless steel. In addition, they feature high load-bearing capacity, high stability, and a long service life. Below are some maintenance methods for rail-type lifting platforms.
What are the advantages of a guide rail lift platform?
The industry of guide rail lifting platforms has a bright future. They offer numerous benefits to businesses, making them highly popular among customers. To help people become more familiar with them, let's discuss the advantages of guide rail lifting platforms. Hopefully, this will be helpful to many.
Dry goods sharing: Understand the functions of a guide rail lift platform in one minute
A rail-guided lifting platform is a hydraulic lifting platform consisting of a hydraulic lifting section, guide rails, and a loading platform. What is the purpose of a rail-guided lifting platform?
Shandong Jiyang Machinery Factory
Tel: 86-531-84211935 86-531-84222430
Fax: 86-531-84211081
Mobile: 86-185-6002-7566
Email: sdjyjxc@126.com
Address: No. 1, Mechanical Industry Park, Jiyang District, Jinan City, Shandong Province (West side of G220 line, Huihe Street)
Mobile Website