Welcome to Shandong Jiyang Machinery Factory(Skyscraper Machinery)!
Brief description of rail-type hydraulic lifting platform
Publish Time:
Apr 28,2022
The main structure of the rail hydraulic lift adopts high-strength rectangular pipe welding, with high strength, high load-bearing capacity, smooth lifting, and simple and convenient installation and maintenance. It is an ideal cargo transportation equipment to replace elevators between low floors.
Rail Hydraulic Lifting Cargo Elevator The main structure adopts high-strength rectangular pipe welding, with high strength, high load-bearing capacity, smooth lifting, simple and convenient installation and maintenance. It is an ideal cargo transportation equipment to replace elevators between low floors.
I. Characteristics of Lifting Cargo Elevator
1. Rail Hydraulic Lifting Cargo Elevator It utilizes rails for the elevator platform to run smoothly between the rails, and is a dedicated hydraulic lifting cargo elevator for transporting goods between building floors and warehouses. The lifting height ranges from 1 meter to 20 meters.
2. During installation, the guide rail hydraulic lifting platform does not need to be directly lifted or lowered from the cargo platform, steel frame, or floor. Forklifts and manual hydraulic forklifts can conveniently and smoothly perform loading and unloading operations. After operation, the platform is level with the ground, does not occupy ground space, and does not affect passageway traffic.
3. Rail Hydraulic Lifting Cargo Elevator The main body structure uses high-strength rectangular pipes, with high strength, large load-bearing capacity, smooth lifting, and simple and convenient installation and maintenance. It is a cost-effective and ideal cargo transportation equipment to replace elevators between low floors.
4. The uniquely designed balancing system ensures a smooth and consistent downward process, and the rail lift hydraulic system prevents falls. An overload protection device, operation buttons are installed on each floor and the lifting platform, enabling multi-point control.
II. Lifting Cargo Elevator Constituent Parts:
Guide rail hydraulic lift - therefore consists of guides, chains, and hydraulic system.
1. Rails: With the continuous improvement of lifting cargo elevators, the rail designs for rail lifts vary. There are H-beams, square steel, channels, etc. Diverse, but essentially the same. The elevator ladder's position acts as a shoulder, preventing the elevator platform from shaking.
2. Chains: Chains can be divided into plate chains and single chain chains, with even more varied models. It can be said that the chain acts as a blood vessel in the lifting cargo elevator, mainly lifting the cargo and delivering it to the appropriate designated location.
3. Hydraulic System: The hydraulic system consists of a hydraulic cylinder, hydraulic pump, and hydraulic oil pipes, forming a complete and compact combination, serving as the heart of the lifting cargo elevator.
The combination of these three systems has led to the continuous development and increasingly widespread use of our guide rail hydraulic lifts.
Performance of the Lifting Cargo Elevator
Lifting Cargo Elevator Installed together with the traditional traction elevator device. Overflow valve: Prevents excessive system pressure during upward movement. Emergency manual valve: If a power failure occurs, the car can be lowered to the floor position to open the door. Manual pump: If the system malfunctions, the manual pump can be operated to pump out high-pressure oil to pull the car to the floor position. Pipe rupture valve: When the hydraulic system pipe ruptures and the car speeds down, it can automatically cut off the euro and stop the descent. Oil tank temperature protection: If the oil temperature in the oil tank exceeds the standard set value, the oil temperature protection device will generate a signal to stop using the elevator. Once the oil temperature drops, the elevator can be started.
BLOGS
Liu Tiesheng was re-elected as a member of the Jiyang County CPPCC for five consecutive terms and served two terms as a standing committee member. He is the former chairman of Shandong Jiyang Machinery Factory Co., Ltd. During the transition from a planned economy to a market economy, he demonstrated exceptional foresight and courage, leading the way in technological innovation and contributing to the prosperity of Shandong Province and the nation. His achievements made the company a shining success. He is considered a prominent figure in Jiyang County's 30 years of reform and opening up, a pioneer in the development of the Jiyang lifting platform industry, and a well-deserved leader in the machinery industry!
Introduction to the civil engineering advantages of rail-guided lifting platforms
Guide rail lifting platform is a kind of non-scissor hydraulic lifting mechanical equipment, used for cargo transmission between floors of two or three-story industrial plants, restaurants, and hotels. It can have a low height of 150-300mm, especially suitable for workplaces where pits cannot be excavated, and does not require upper suspension points. It comes in various forms (single-column, double-column, four-column). The equipment operates smoothly. The guide rails of the guide rail lifting platform are generally made of channel steel, I-beams, and square tubes welded together. It is simple, reliable, and economical for cargo transmission. Hydraulic lifting platforms are multifunctional lifting and handling mechanical equipment with lifting heights ranging from 1m to 30m. They can also be customized according to different user needs.
What is the purpose of a guide rail lift platform?
Rail-guided lifting platforms are widely used and are a popular product on the market due to their various advantages. However, there are many points of knowledge that need to be understood when using them, as many users are not aware of them. Next, let me introduce the uses of rail-guided lifting platforms. Those interested can read on.
How to maintain a guide rail lift platform?
The advantages of rail-type lifting platforms lie in the hydraulic system's anti-falling and overload safety protection devices. The railings on each floor and the lifting platform are made of stainless steel. In addition, they feature high load-bearing capacity, high stability, and a long service life. Below are some maintenance methods for rail-type lifting platforms.
What are the advantages of a guide rail lift platform?
The industry of guide rail lifting platforms has a bright future. They offer numerous benefits to businesses, making them highly popular among customers. To help people become more familiar with them, let's discuss the advantages of guide rail lifting platforms. Hopefully, this will be helpful to many.
Dry goods sharing: Understand the functions of a guide rail lift platform in one minute
A rail-guided lifting platform is a hydraulic lifting platform consisting of a hydraulic lifting section, guide rails, and a loading platform. What is the purpose of a rail-guided lifting platform?
Shandong Jiyang Machinery Factory
Tel: 86-531-84211935 86-531-84222430
Fax: 86-531-84211081
Mobile: 86-185-6002-7566
Email: sdjyjxc@126.com
Address: No. 1, Mechanical Industry Park, Jiyang District, Jinan City, Shandong Province (West side of G220 line, Huihe Street)
Mobile Website