Hydraulic Lift Platform: What are the advantages of guide rail hydraulic lift platforms?

Hydraulic Lift Table: What are the advantages of a hydraulic lift table

The guide rail hydraulic lift table, a type of non-shearing hydraulic lift table, is widely used for vertical cargo transportation. The oil pump is mainly driven by a motor, with the hydraulic lift table driven by a heavy chain driven by an oil cylinder. It is widely used for vertical cargo transportation between high-rise buildings. Let's look at the advantages of the guide rail hydraulic lift table.

High safety: The guide rail hydraulic lift table uses heavy chain transmission, explosion-proof hydraulic oil pipes, overload safety devices, multiple limit switches for protection, door opening power-off protection devices, leakage protection devices, and multi-layer interlocking. Therefore, the safety factor of the guide rail hydraulic lift table is much higher than that of ordinary flat tables.

Simple maintenance: The guide rail hydraulic lift table uses an oil cylinder and chain transmission, with fewer moving parts than a scissor hydraulic lift table, resulting in less maintenance work. In addition, the guide rail hydraulic lift has a compact structure, fewer bearings, and a long service life.

The guide rail hydraulic lift table uses hydraulic transmission, has a large load capacity, can transport to heights of tens of meters, and has good stability. The table relies on its own weight and the weight of the cargo to lower itself, which is more economical than ordinary tables, but it can also achieve intelligent control and display, with an overall low failure rate.

Advantages and Characteristics of Hydraulic Lift Tables

Currently, many company warehouses are equipped with hydraulic lift tables. Fixed hydraulic flat tables have several problems during operation. So how to avoid them?

The fixed hydraulic lift table is a commonly used lifting device with many types and large production volume among conventional scissor lifts, and it is also one of the widely used lifting devices at present. Based on the summary of the problems of hydraulic lifting equipment in recent years, several common problems of lifting platforms can be summarized.

Tabletop tilt is Hydraulic Lift Table a high-probability problem, especially for mobile scissor lifts. Lifting tables undergo rigorous inspections during the manufacturing process. If unqualified hydraulic lift tables enter the market, not only will there be safety hazards, but it will also affect work efficiency. Strict requirements are crucial.

The second category of factors is defects in the platform itself and wear and tear after use, resulting in:

1. Severe oil cylinder damage, damage to internal seals and closed loops, or internal obstructions can easily lead to uneven force on the oil cylinder and uneven lifting height. It is recommended to carefully check whether the oil cylinder is normal. The inspection of the table mechanism parts is performed by technicians standing on the table and the hydraulic platform, observing the degree of wire rope wear, the number of worn and broken wires, checking the condition of the rope head fixation, the amount of wire rope wear and the safety margin, as well as the phenomenon of wire rope entanglement, jumping out of grooves, and disordered arrangement on the drum.

In existing elevator technology, the operating platform in various hydraulic guide rail elevators can only move up and down in the vertical direction, and cannot move horizontally and vertically, or rotate on a horizontal plane. The inspection of the lifting table structural components refers to whether there are phenomena such as deformation, cracks, cracking, or loose welds; as well as whether the pin connecting rods and bolts are damaged or loose.

2. Foreign objects in the oil pipeline lead to (cause and promote) uneven stress in hydraulic oil transmission, which may lead to an uneven table surface. It is recommended to carefully check whether the oil pipeline is unobstructed. 3. Inconsistency of the intermediate shaft of the support rod leads to the inability of the lifting platform to work normally, serious platform damage, and tabletop tilt. Please check carefully.

Shandong Jiyang Machinery Factory Co., Ltd. mainly produces cargo lifts, loading docks, lift tables, lifts, lift cargo lifts, lifting platforms, electric lifts, hydraulic lift tables, hydraulic lifts, scissor lifts, guide rail lifts, hydraulic lifting platforms, fixed lifting platforms, guide rail lifting platforms, scissor lifting platforms, etc. The company has strong technical strength, excellent production equipment, advanced and reasonable technology, and complete testing methods. Our company is a drafting participant of the standard for scissor-type hydraulic lifting platforms. Products are widely used in engineering construction, industrial installation, equipment maintenance, factory maintenance, property management, three-dimensional warehouses, aviation, airports, ports, stations and many other industries and places.