Welcome to Shandong Jiyang Machinery Factory(Skyscraper Machinery)!
Precautions for scissor lift use?
Publish Time:
Dec 06,2022
Scissor lifts are extensively used in outdoor cleaning, warehousing and handling, billboard replacement, exhibition installation, property maintenance, lighting replacement, and other similar tasks due to their ease of use, convenient storage, and high work efficiency. Below are some precautions for using scissor lifts.
In some outdoor cleaning, warehousing and unloading, billboard replacement, exhibition installation, property maintenance, lighting replacement and other work, at this time Scissor lift Has been widely used, it has the characteristics of convenient use, easy storage, high work efficiency, etc. Below we will talk about the precautions for scissor lifts?
A scissor lift is a special piece of equipment. While it brings convenience to use, it is also necessary to pay attention to some of its operation matters. After all, people work at high altitudes. Paying attention to some matters can also avoid accidents. First of all, at least two people must operate the equipment together when using the equipment to ensure that one person works and the other person is under safe supervision. Be sure to work according to the specified load, and strictly prohibit overloading. During the operation of the lifting platform, it must be unfolded. It should also be regularly maintained by a designated person. The use of scissor lifts must be by trained professional operators, and a high-altitude work permit must be obtained before use. Another important point is that the operator must check in advance whether the electrical wiring and mechanical equipment are compliant, whether the line control is normal, whether the oil level is normal, whether the oil pipe is normal, and within the working range of the scissors. Lifting platform, scissors must not have any obstacles. Obstacles on the forklift platform. Before starting the scissor lift, a flat ground should be selected, and the four legs should be opened. If the foundation is soft or uneven, it must be reinforced with sleepers to ensure that all four legs are on the ground and adjusted smoothly before lifting operations can be carried out.
The scissor lift must not be moved during operation or when in the raised position. Or during the lifting process, the personnel on the platform must squat and stay below the safety barrier, and only start work after the lifting is completed and the safety supervisor gives the stop signal. Violent shaking on the scissor lift is strictly prohibited, and playing around is strictly prohibited when multiple people are working. During the hoisting process, the safety supervisor must ensure that no one else passes through the working area, and take isolation measures around the platform to prevent falling objects from causing injuries. The operator of the scissor lift should wear a safety belt. When working in electrified areas, the body should be grounded. The climbing operation of the scissor lift should be guided by the person in charge of the work. Before operation, the person in charge of the work should explain the technology and safety to the operator. It is recommended that everyone check for obstacles in the air and high-voltage lines before operation. According to current regulations and standards, the platform should maintain a safe distance from the energized high-voltage lines from beginning to end and must not cross. Basically, there will be no problems if you follow the editor's instructions. And under no circumstances is anyone allowed to work outside the railing. When rising, descending, or moving, care should be taken to prevent steel wire ropes, wires, hoses, etc., from being entangled.
BLOGS
Liu Tiesheng was re-elected as a member of the Jiyang County CPPCC for five consecutive terms and served two terms as a standing committee member. He is the former chairman of Shandong Jiyang Machinery Factory Co., Ltd. During the transition from a planned economy to a market economy, he demonstrated exceptional foresight and courage, leading the way in technological innovation and contributing to the prosperity of Shandong Province and the nation. His achievements made the company a shining success. He is considered a prominent figure in Jiyang County's 30 years of reform and opening up, a pioneer in the development of the Jiyang lifting platform industry, and a well-deserved leader in the machinery industry!
Introduction to the civil engineering advantages of rail-guided lifting platforms
Guide rail lifting platform is a kind of non-scissor hydraulic lifting mechanical equipment, used for cargo transmission between floors of two or three-story industrial plants, restaurants, and hotels. It can have a low height of 150-300mm, especially suitable for workplaces where pits cannot be excavated, and does not require upper suspension points. It comes in various forms (single-column, double-column, four-column). The equipment operates smoothly. The guide rails of the guide rail lifting platform are generally made of channel steel, I-beams, and square tubes welded together. It is simple, reliable, and economical for cargo transmission. Hydraulic lifting platforms are multifunctional lifting and handling mechanical equipment with lifting heights ranging from 1m to 30m. They can also be customized according to different user needs.
What is the purpose of a guide rail lift platform?
Rail-guided lifting platforms are widely used and are a popular product on the market due to their various advantages. However, there are many points of knowledge that need to be understood when using them, as many users are not aware of them. Next, let me introduce the uses of rail-guided lifting platforms. Those interested can read on.
How to maintain a guide rail lift platform?
The advantages of rail-type lifting platforms lie in the hydraulic system's anti-falling and overload safety protection devices. The railings on each floor and the lifting platform are made of stainless steel. In addition, they feature high load-bearing capacity, high stability, and a long service life. Below are some maintenance methods for rail-type lifting platforms.
What are the advantages of a guide rail lift platform?
The industry of guide rail lifting platforms has a bright future. They offer numerous benefits to businesses, making them highly popular among customers. To help people become more familiar with them, let's discuss the advantages of guide rail lifting platforms. Hopefully, this will be helpful to many.
Dry goods sharing: Understand the functions of a guide rail lift platform in one minute
A rail-guided lifting platform is a hydraulic lifting platform consisting of a hydraulic lifting section, guide rails, and a loading platform. What is the purpose of a rail-guided lifting platform?
Shandong Jiyang Machinery Factory
Tel: 86-531-84211935 86-531-84222430
Fax: 86-531-84211081
Mobile: 86-185-6002-7566
Email: sdjyjxc@126.com
Address: No. 1, Mechanical Industry Park, Jiyang District, Jinan City, Shandong Province (West side of G220 line, Huihe Street)
Mobile Website